Automobile Archive

Top 10 Warnings of Bad Front/Rear Wheel Bearing

Indications for bad wheel bearing may vary depending on severity. In some cases, it will be very difficult to detect and leads to damage before taking the necessary prevention methods. 

wheel bearing warnings

The occurrence of damage depends on the mechanical practices during the installation process and driving condition. A common indication of the bad wheel bearing is the noise produced while driving the vehicle.

Here we listed some indications of the bad wheel bearing. Follow these warnings and take appropriate precaution measure to prevent your wheel bearing from damage. Else all your saved money will be spent on wheel bearing itself. Also check the wheel bearing cost for your vehicle/car to verify whether you can able to purchase it or not.

Clunking or Knocking

This type of extreme signal plays in the U-joints or CV-joints. Differential gears can also cause this issue. However, it is not associated with bearings but heard when moving gears in changing directions, such as transitioning from accelerating to coasting or forward to reverse.

Grinding when the Wheels are in Motion.

It is known as the mechanical damage that occurs in the wheel system. It relates to bearing, and noise will be heard while turning or when there is a change in load.

Snapping, Clicking, or Popping

It is an indication of damaged outer CV-joint. It also can be associated with excessive bearing endplay, normally linked with inadequate clamping. This noise will be heard while turn on corners or making sharp turns.

Humming, Growling, or Rumbling

These noises are usually correlated with the wheel, electrical or drivetrain components. If it is bearing related, the noise will be heard while driving the car in a straight line and increases while turning the steering to the right or left.

wheel bearing warnings


It is an indication of the damaged suspension components or tires that are not in a balanced state. And it is nowhere related to the indication of bearing damage.

Uneven Rotor

It is also not related to the bad wheel bearing and an indication for bad equalizer or bad caliper. Severe looseness linked with the damaged bearing will cause extreme runout and results in jagged depreciation on the rotors or brake pads.

Abnormal Side Pull During Brakes.

Even though it is an indication for defective equalizer or caliper but it also can be an indication of rotors or bad brakes too. However, critical damage related to a bearing will cause a disproportionate runout and make the brakes to pull.

ABS failure

In severe cases, both the external and internal sensors will be damaged by the excessive movement of a high-level end play. This symbolizes the loss of a bearing clamp. Severe mechanical damage to the braking system also makes this issue. 

Wheel vibrations

Wheel vibrations are usually caused because of the worn wheel, chassis misalignment, and suspension components. By relating this with bearing, it indicates the bearing with a high level of mechanical damage or loss of clamp. It will also occur if the lug nuts are not accurately torqued.

Abnormal Tire Wear

There are plenty of reasons available for abnormal tire wear. The most common reasons are misalignment, damaged suspension components, and improper inflation. Rash driving also causes the tire to damage and results in reducing the lifetime of wheel bearings.


Wheel bearing maintains a significant role in the safety of a car. If it breaks while driving means severe accident can occur. Always pay attention to these kinds of things while maintaining a vehicle. And make sure to follow all the precaution methods in preventing the wheel bearing from damage. If you need any further help means you can comment below I will try to help with my knowledge.

Top Guide for Beginners to Car Detailing in Sydney

For any car owner, maintenance of their Car means washing it once or twice in a month, because it’s just their Car. But for a car lover, it involves much more than washing, thats detailing their Car.

For them it’s their baby. Dedicating this article to all those car lovers out there, we would like to provide you, some basic idea about car detailing. So let get into the topic.

Car Washing vs. Car Detailing.


The fundamental question that comes to your mind when you hear about car detailing is, how is it different from regular car washing? That is why we thought of answer this question keenly in the following points;

Through a regular car wash, all dirt and debris on car’s exterior part are removed. And weight of the wheels are reduced by removing all the mud that they have been carrying.

Regular car wash doesn’t care about the scratches that your Car has, the mud or dust that is inside your Car, minor cracks on your glass, finishing off the body of your car e.t.c.

Car detailing includes all these things. Once you are detailing your car, it looks just like the Car that is out from the showroom.

In a car detailing process every minor detail of your car, from the debris in your exhaust pipe to that large piece of dirt in your tires, everything will be cleaned. Your car paint is also given protection with paint protection coating.

Now you have known the difference between Car Washing and Car Detailing, you may like to try Detailing for your Car once. But before that, you surely might want to know how exactly is a ‘car detailing operation’ done? And here is your answer;

Steps involved in Car detailing:

Cleaning the exterior :

The entire cleaning process starts with the tires. Initially, tires are cleaned, then exterior of the Car is cleaned. This cleaning is done by applying the car soap and then washing it with brushes and finally cleaning with water. This step removes the dirt that your Car has been carrying over its body.

Protecting the exterior:

In this step, the Car is dried first. After drying, tire shine is sprayed on the tires to give them a glossy look that had at the time of their manufacturing. Next, paint protection coating is applied to the body of the car.

There many types of coatings available in the market, but ceramic coating is considered as the best of all. The reason is that it gives more glossy look for a longer time than usual wax coatings.

Cleaning the interior:

After getting done with the exterior, it’s now time to clean your interior. Now, dirt and debris in your car interior are removed and cleaned properly with pressurized air. And the freshener in your Car is also changed.

Interior detailing:

Once the interior is cleaned, it is now time to give that showroom shine to your interior. This is done by using some specialized tools that make the interior of your Car a shine like anything.

Since you have known about the process, not you might be thinking of trying it once. But we know what you are afraid of. About the cost and place, right? But let me tell you that your worry is not at all a big thing when our guide for beginners in sydney is here. Let us quickly know about this now;


Car detailing in Sydney:

Car detailing Sydney is a Professional and Certified Mobile Detailing service. They are specialized in Headlight Restoration, Interior and Exterior Detailing, Paint Correction, and Paint Protection within the Sydney Region. They have also approved the applicator of Nano4life Ceramic Coatings.

Here at Sydney Car Detailing Service, there is a team of committed people who can bring back the beauty of your Car at reasonable prices. With 5/5 ratings from more than hundred customers, Car detailing in Sydney is growing its business by providing its customers at most satisfaction.

One can have a look at their facebook page to know the reviews of the customers before handing over your Car to them. Thus you can give your Car that glam look by giving it to the best in the business and make your car more popular in Sydney area.